LI 40 Polymer Lithium Ion Rechargeable Battery Safety Data Sheet SL360-SL28. Battery Charger SC4 - Automatic Battery Charger for Marine/Deep-cycle.
• Air Compressor 5-gallon 058-7949-6 Owner’s Manual Parts Missing or Damaged? Toll-Free Help Line – 1-888-942-MOTO (1-888-942-6686) IMPORTANT: Ensure that all users have read all safety rules and operating instructions carefully before using this product. Keep this Owner’s Manual in a safe place for future. • TROUBLESHOOTING CHART.11-12 PARTS SCHEMATIC.13 PARTS LIST.13 WARRANTY.14 SPECIFICATIONS Product number 058-7949-6 Peak horsepower Tank size 2 1/2 gallons (x2) Air delivery (SCFM) @ 40 PSI Air delivery (SCFM) @ 90 PSI Cut-in pressure (PSI) Maximum pressure (PSI) • Safety Guidelines This manual contains information that relates to PROTECTING PERSONAL SAFETY and PREVENTING EQUIPMENT PROBLEMS. It is very important to read this manual carefully and understand it thoroughly before using the air compressor.
The symbols listed below are used to indicate this information. POTENTIAL HAZARD THAT WILL RESULT IN SERIOUS INJURY OR LOSS OF LIFE POTENTIAL HAZARD THAT COULD RESULT IN SERIOUS INJURY OR LOSS OF LIFE POTENTIAL HAZARD THAT MAY RESULT IN MODERATE INJURY OR DAMAGE TO EQUIPMENT.
• KNOW YOUR AIR COMPRESSOR A--------ELECTRIC MOTOR (not visible) B--------AIR COMPRESSOR PUMP C--------PRESSURE SWITCH D--------PRESSURE RELIEF VALVE E--------AIR PRESSURE REGULATOR F--------TANK PRESSURE GAUGE G--------REGULATED PRESSURE GAUGE H--------AIR LINE OUTLET I---------AIR TANK DRAIN VALVE J---------AIR TANK K--------POWER CORD Standard Equipment 25’ recoil hose with 1/4” NPT connector and quick connector - 4. Sony acid pro 8 torrent. • KNOW YOUR AIR COMPRESSOR A. ELECTRIC MOTOR: The motor is used to power the pump.
It has a thermal overload protector and an automatic reset. If the motor overheats for any reason, the thermal overload protector will shut it down to prevent the motor from being damaged. • Compatible Compressor & Air Tool - Guidelines for Proper Usage & Operation Always ensure the use of appropriately matched air tools with your Motomaster® Air Compressor.
Be sure that the air compressor being used can supply the appropriate volume, pressure and delivery rate of air to the tool(s) without running continuously. • BEFORE YOU START - ASSEMBLY INSTRUCTIONS 1. Unpack the air compressor. Inspect the unit for damage.If the unit has been damaged in transit, contact the carrier and complete a damage claim, Do this immediately because there is time limitation to damage claims. • BEFORE YOU START BREAK-IN PERIOD OF THE PUMP NOTE: The pump is shipped oil. Before starting, the break-in oil provided in an oil bottle should WITHOUT be poured in the pump through the oil nozzle. The break-in oil should be changed after 8 hours of operation.
• Operating Instructions Daily Start-Up If the pump has been transported or turned upside down (even partially), allow the pump to sit in a normal, upright position for approximately 10 minutes before starting. Before starting, check the oil sight glass to ensure that oil level in the pump is at the required level. • MAINTENANCE To avoid personal injury, always shut off and unplug the unit and relieve all air pressure from the system before performing any service on the air compressor. Regular maintenance will ensure trouble-free operation.